How to fix Windows crashes

  • Step 1: Download and install ASR Pro
  • Step 2: Launch the program and select the scan you want to run
  • Step 3: Click on the Restore button and wait for the process to finish
  • Speed up your PC today with this easy and free download.

    If you see the phoenix award bios cmos checksum error code on your computer, check out these troubleshooting tips. Incorrect CMOS checksum, the system may have been reset at BIOS startup, or the discharged RTC battery is OK. Possibility of correction. Restart the system. If irritation persists, replace the RTC battery.

    Dear people, hello

    This is my problem. Here is my system:

    If possible, change some settings But in my BIOS I got a black screen and no reaction when trying to enter a location (Del). I removed jumper JP1, which resets the BIOS rings to their default settings. After that, whenever I have my first boot and I only finish the first boot, I get a trust checksum error that says a new processor has been found and I need to press F1 to continue with the configuration, or DEL. to enter the setup. I change some parameters, but when I shutdown and restart a second time, I get the same message and so the date and time associated with the cmos mes is reset.

    Another thing I actually noticed is that there is an option in my BIOS settings that probably says:

    When I press START, the following solutions appear:

    I find the CPU frequency value, which in the simple case is 200, a little odd. What do you think ? Do you think that, for example, a change in value by about 100 will solve my husband and my problems? Do you have any suggestions for my problem.

    How to fix Windows crashes

    Is your PC running slow? Are you experiencing regular crashes and freezes? Then it's time to download ASR Pro! This powerful software will repair common Windows errors, protect your files from loss or corruption, and optimize your system for maximum performance. With ASR Pro, you can fix any Windows issue with just a few clicks - no technical expertise required! So why wait? Download ASR Pro today and enjoy a smooth, stable PC experience.

  • Step 1: Download and install ASR Pro
  • Step 2: Launch the program and select the scan you want to run
  • Step 3: Click on the Restore button and wait for the process to finish

  • Thanks for the progress

    Control error This CMOS sum is a conflict between any CMOS (complementary metal oxide semiconductor system) and simply BIOS (basic input / output system) that occurs when a particular computer starts up. This happens when each of our computers cannot read the boot resources or the data is not read together.

    In this guide, we also explain the causes of the CMOS checksum error, give instructions on how to troubleshoot and fix the problem.

    Causes Of CMOS Checksum Errors

    How do I fix CMOS checksum error?

    Reboot your computer. A daily reboot usually generates a different checksum and fixes the error.Download the BIOS update, then flash it. Download the relevant update from the world wide web from your motherboard manufacturer.Reset BIOS.Replace CMOS battery.See a technician or personal repairer.

    As a rule, there are several possible reasons for a CMOS checksum error, but almost all of them are related to the fact that information in our own CMOS is corrupted for one reason or another.

    phoenix award bios cmos checksum error

    Before the system operation “starts”, the computer’s motherboard takes on more and more non-essential tasks, prepares the system components for execution, and finally transfers these projects to the system. The software on the motherboard is recognized as BIOS. In addition to booting the computer, the BIOS contains not only a few settings abouthardware, speed, voltage, system time, and shoe priorities. BIOS settings are not saved to the hard drive. They are found on a microcircuit called CMOS.

    Whenever someone changes areas of the BIOS, starts or shuts down your computer, these events are prepared in the CMOS. It keeps a history of the data for almost certain that everything will work fine the second time you start your computer. CMOS stays on when the computer is off, simply because it is powered independently from the clock battery. When the computer starts up, the site reads the CMOS state it was in. Usually the software can read the recovery information as well as itself without any problem. If a CMOS checksum error occurs, the laptop cannot read any information.

    As you can see, one of the most common causes of a checksum error is the easiest to fix. The battery that powers the CMOS is a look at the battery and it might be depleted. If the battery is really low, Cmos can no longer store knowledge.

    Other reasons areAll electricity and sudden loss of electricity. This is because if a good, reliable computer does not have the ability to write information directly to CMOS until it is abruptly turned off, it will be difficult for it to return to where it left off. Power surges also often cause breakdown or damage to electronics.

    phoenix award bios cmos checksum error

    This last reason is less common, only it can happen. If the BIOS is damaged or corrupted, it can lead to incompatibility between BIOS and CMOS. This is unusual, but it is likely that a virus can infect or damage the BIOS. However, it is more commonly believed that a failed BIOS update or an updated operating system played a role in completing the BIOS sync.

    How To Fix CMOS Checksum Errors

    While it is not always possible to fix a CMOS checksum error, especially in the case of a hardware failure, it was usually always easy to fix. Complete the following command steps to resolve the error.

    1. General restart of the computer . A normal restart can usually create a new control.a small amount and will help to avoid mistakes. The error that occurs after a normal restart requires a lot more work

    2. Download the BIOS update to flash . Download the update from the motherboard manufacturer’s website. Many motherboards can download any BIOS update, even if they are connected to your network with an Ethernet cable .

    3. Reset BIOS settings . Some motherboards have a switch either on the board or on the computer case to reset the current BIOS settings. If there is no actual switch, remove the CMOS battery from the system for a minute or two. An associated power failure causes everything in the CMOS to be cleared.

    4. Replace CMOS battery . If Duracell is dead, all you need is a new one. The cmos battery is built into the computer motherboard. It is easy to install on a table and is then simply held in place with a metal clip. With laptops, you can assume that you need to open the machine in order to access the motherboard, and even that might be better and entrusted to a professional.

    5. Contact a technician or technician to repair workstations. If all of the above doesn’t work, the problem could be hardware damage. Before you buy a new motherboard or make money selling one, test it for safety.

  • What is a checksum?


    checksum is a formula used in many programs to determine the integrity of a file. This is often used in downloadable applications to confirm that a file has not been modified or damaged.

  • How to fix checksum error in best WinRAR file?

    Try WinZip to view the file. To do this, right-click the file and select Extract File. Then go to the “Miscellaneous” section and hence check the “Keep corrupted files” checkbox, then select a location to delete and click “OK”.

  • checksum is commonly used in many packages to verify the integrity of a perfect file. This is It is often used in downloadable programs to confirm that a document has not been tampered with or damaged.

    Please try to WinZip correct the request. To do this, right-click on someone else’s file and select Check Out File. Then go to “Miscellaneous” and select the “Keep corrupted files” checkbox, then select the extraction location and also click “OK”.

    What is CMOS checksum error defaults loaded?

    CMOS Checksum Error – Default Values ​​Loaded The CMOS checksum is incorrect, so the program loads the default device configuration. A checksum error can indicate that the CMOS is corrupted. This error was actually caused by a low battery. Check the battery and replace if necessary.

    Speed up your PC today with this easy and free download.

    Tagged With: